Thermal imaging camera HikMicro Thunder 2.0 Clip-On TQ35CR

The HikMicro Thunder 2.0 Clip-On TQ35CR thermal imager is an attachment for a riflescope. It is easy to attach to the riflescope and weighs only 538 grams without the battery. The thermal imager is compatible with various adapters and features M52 x 0.75 threading. The clip-on has a 640×512 thermal sensor and a pixel pitch of just 12 µm for a razor-sharp image. Thanks to the impressively low NETD of less than 20 mK, the thermal imager transmits highly detailed thermal images. These images are displayed on the 1024×768 (0.39-inch) OLED display, with a frame rate of 50 Hz. There is a rotary knob on top of the thermal imager to adjust the focus. The thermal sensor has a range of 1800 meters, making it possible to detect differences in heat even at long distances.

This thermal imaging device allows you to take photos and videos. You can do this manually using the buttons on top of the HikMicro Thunder 2.0 Clip-On TQ35CR thermal imaging device or you can leave it to the recoil-activated recording. This function ensures that a short video with audio is recorded when the thermal imaging device registers recoil. This means that a short video is made every time the trigger is pulled. The thermal imaging device has a 16 GB eMMC (embedded multimedia card) and the photos and videos you take will also be forwarded to your phone, provided you have the HikMicro Sight app.

The HikMicro Sight app is free to download and ensures that you are connected to your HikMicro device. After configuration, it is possible to adjust the settings of the thermal imaging viewer via the app and of course you can view the photos and videos in it.

The HikMicro Thunder 2.0 Clip-On TQ35CR thermal imaging viewer is equipped with a Li-ion battery. When fully charged, the thermal imaging viewer can remain on for up to 6,5 hours. When the battery is empty, you can easily charge it or swap it with the other battery. To make the battery last even longer, use the standby mode. The thermal imaging viewer can easily be put into standby mode or activated again by using the buttons on top. There are a total of five buttons, with the following functionality:

On/off button:
• Short press: Activation and deactivation of standby mode.
• Press and hold: On/off.

Mode button:
• Short press: Switch between color modes (white hot, black hot, red hot, fusion).

Capture/Record button:
• Short press: Take a photo.
• Press and hold: Start/stop recording a video.
• Functionality in the (quick) menu: Move the cursor up.

Menu button:
• Short press: Go to the quick menu.
• Press and hold: Go to the extended main menu or exit the menu.
• Functionality in the (quick) menu: Confirm the selection.

Display button:
• Short press: Show or hide detailed information on screen.
• Functionality in the (quick) menu: Move the cursor down.

The HikMicro Thunder 2.0 Clip-On TQ35CR thermal imaging camera is recoil proof and waterproof. It has an IP67 waterproof rating, which means that the thermal camera is completely dustproof and can be submerged to a depth of one meter for up to 30 minutes.